You can follow our main recommendations and motor oil ratings...
Motorcycle oil filters
Remove your motorcycle oil filter cap, place a tray under the bike and remove the sump plug. Remove the appropriate bolt, which is the biggest one on the sump, usually on the bottom or on the side.
Once the oil is drained, remove the filter with a wrench.
Replace the sump plug, tighten to the correct torque setting as recommended in the owner's manual before spinning on a new filter. Smear the rubber filter gasket in clean oil before tightening by hand. Nip it up half a turn with the filter wrench.
Pour new oil. You can restart the bike after and check for leaks. After that, stop the engine for five minutes and check the level again.
Discover in images how to replace your motorcycle oil filter:
Best brake fluid
To help you find the best brake fluid for your vehicle, you can have a look to the page in our online catalogue dedicated to our TOTAL HBF brake fluids : you’ll find our main brake fluid characteristics, benefits, homologations, technical data sheet and safety data sheet (MSDS)
Best high mileage oil
TOTAL Lubricants developed high mileage oils for Latin America and the US with 3 main benefits:
- Chemically enhanced to revitalize seals and thus reduce leakage
- Powerful additives for superior corrosion protection and engine longevity.
- Special refined base oils that help guard against oil burn-off and break down
Best oil quality
TOTAL synthetic base oils are produced by isohydromerization. Isohydromerized base oils used by TOTAL are the fruit of continuous developments and fine tuning in TOTAL refining facilities and with external partners and are used to create tailor-made products for any end-user.
Discover on the picture below to discover the proofs of the top quality of our oils: